|
| |
Gooding &
Associates is proud to offer the very best in exterior trims. Plastic
Component's offers more than 600 different items and sizes. Plastic
Components offers the most complete selection of trims, along with the largest
line of water management products in the industry. We would be please to
find the product that would best meet your projects specific needs.
 |
|
CLICK
THE PICTURE FOR A COMPLETE LIST OF ACCESSORIES. |
 | All
Drywall products are designed for durability and superior
long-lasting use. They won't dent, kink or rust. And
they're compatible with most paints and drywall compounds. |
|
These accessories are designed for
interior application, to resist damage and static electricity. They will not rust. Metal accessories placed against other metal objects
can result in electrolysis occurring. With PLASTIC COMPONENTS, INC. PVC accessories, these common problems are eliminated. |
|
They may be stapled, nailed, screwed or glued into place. Installation should be in accordance with ASTM C1047-94 with accepted industry practices and local
building codes. |
|
|
|
|
The
rust free, impact resistant alternative to metal, our stucco
accessories are manufactured from compounds that meet ASTM
D1784-92. Install in accordance with ASTM C1063-94. |
|
These accessories can be applied to ULTRA-LATH, metal lath, masonry, wood base sheathing products, gypsum sheathing, cement sheathing products, block and
any other approved substrate. They are designed to control expansion and contraction, trim, and protect the stucco. In addition PVC products will
solve problems relating to static electricity, electrolysis, rust, oxidation, excessive dents or kinks and damage in transit or on the job site. |
|
Installation should be in accordance
with accepted industry standards and local building codes. |
|
CLICK
THE PICTURE FOR A COMPLETE LIST OF ACCESSORIES. |
|
|
CLICK
THE PICTURE FOR A COMPLETE LIST OF ACCESSORIES.
|
|
Our
EIFS/DEFS products are manufactured of weather- able grade PVC that
meets or exceeds ASTM D1784. |
|
These products are designed to help eliminate some of the labor intensified practices such as rasping and double wrapping of corners while providing a straight
and impact resistant corner. The starter trac with drip edge will stop any moisture from running down the face and back into the system. These starter tracs and casing
beads eliminate the need to apply finish at the termination point while providing a straight, impact resistant edge. |
|
Installation should be in accordance with, and recommendations of system manufacturer, accepted industry standards and local building codes. |
|
|
|
Since PVC products are installed differently than metal trim, PLASTIC COMPONENTS, INC. has written an
installation handbook and is available from Gooding & Associates upon
request.
CLICK ON LOGO FOR
PLASTIC COMPONENTS WEBSITE.
Offers specific downloadable product information.
BACK TO THE GOODING & ASSOCIATES TRIMS INDEX
BACK TO GOODING & ASSOCIATES PRODUCTS PAGE
|